SSG-6047R-E1R72L2K |
- SuperServer 6047R-E1R72L2K (Black)
|
|
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details
|
Note |
- † BIOS version 3.0 or above is required
|
Cache |
|
System Bus |
|
|
Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
Chipset |
|
SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
SAS |
- SAS2 via LSI 2308; IT Mode/Pass-through
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Renesas SH7757 BMC
|
Network Controllers |
- Intel® i350 Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
- G200 (Renesas SH7757 BMC w/ graphic controller)
|
Super I/O |
|
|
Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
SAS |
|
LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 9x USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
|
|
Form Factor |
|
Model |
- CSE-847DTS-R000LP
(only sold as complete system)
|
|
Width |
|
Height |
|
Depth |
|
Weight Unpopulated |
- Net Weight: 67 lbs (30.4 kg)
- Gross Weight: 104 lbs (47.2 kg)
|
Available Colors |
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
PCI-Express |
- 4x PCI-E 3.0 x8 slots (Low-profile)
|
|
Hot-swap |
- 72x 3.5" SAS2/SATA3 in 36x Hot-swap drive bays (2x HDD per bay w/LEDs for each drive)
- Double-sided: 24 front + 12 rear HDD Bays
|
Fixed |
- Internal Drive Bracket suppports 2x 2.5" drive bays
|
|
SAS2 / SATA3 single expander per backplane |
|
Fans |
- 7x 9cm hot-swap cooling fans
- Redundant cooling
|
|
2000W redundant power supply |
AC Input |
- 1100W Output @ 100-120V, 12.7-10.5A, 50-60Hz
- 1400W Output @ 120-140V, 13.5-11.5A, 50-60Hz
- 1800W Output @ 200-220V, 10.0-9.5A, 50-60Hz
- 1980W Output @ 220-230V, 10.0-9.8A, 50-60Hz
- 2000W Output @ 230-240V, 10.0-9.8A, 50-60Hz
|
DC Output |
- 1100W: +12V/91.7A; +5Vsb/4A
- 1400W: +12V/116.7A, +5Vsb/4A
- 1800W: +12V/150.0A; +5Vsb/4A
- 1980W: +12V/165.0A; +5Vsb/4A
- 2000W: +12V/166.7A; +5Vsb/4A
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X9DRD-7LN4F-JBOD
CSE-847DTS-R000LP |
1 1 |
Super X9DRD-7LN4F-JBOD Motherboard
4U SC847D Double-sided Storage Chassis w/o PSU (only sold as complete system) |
Backplane |
BPN-EXP-847DF2EL1 |
1 |
Front expander daughter card (contains 2 expander chips) for BPN-SAS2-847DF backplane (which is front backplane for SC847DE16-R1K62B system) |
Backplane |
BPN-SAS2-847DF |
1 |
Front backplane for SC847DE16-R1K62B system (front backplane support 48x HDD; and rear backplane support 24x HDD; total 72x HDD) |
Backplane |
BPN-EXP-847DR1EL1 |
1 |
Rear expander daughter card (contains 1 expander chip) for BPN-SAS2-847DR backplane (which is rear backplane for SC847DE16-R1K62B system) |
Backplane |
BPN-SAS2-847DR |
1 |
Rear backplane for SC847DE16-R1K62B system (rear backplane support 24x HDD; while front backplane support 48x HDD; total 72x HDD) |
Cable 1 | CBL-0296L |
4 |
4 pin to 4 pin fan extension cord, for PWM fan. 23cm. 24AWG |
Cable 2 | CBL-SAST-0507-01 |
4 |
Internal Mini-SAS to Mini-SAS HD 80cm w/ SB, 30AWG,HF,RoHS/REACH,PBF |
Cable 3 | CBL-SAST-0508-01 |
2 |
Internal Mini-SAS to Mini-SAS HD 50cm w/ SB, 30AWG,HF,RoHS/REACH,PBF |
Cable 4 | CBL-0508L |
2 |
Internal Mini-SAS to Mini-SAS HD 500mm w/o SB for expender only. 30AWG |
Cable 5 | CBL-PWCD-0578 |
2 |
Power Cord Type IEC (C14 to C13) 3 ft (14AWG), 15A, 250V,HF,RoHS/REACH,PBF |
Cable 6 | CBL-0507L |
4 |
Internal Mini-SAS to Mini-SAS HD 800mm w/o SB for expender only. 30AWG |
Heatsink / Retention |
SNK-P0048PS |
2 |
2U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MB |
AOC |
AOC-S2308L-L8E-O-P |
2 |
AOC with LSI SAS controller |
Power Supply |
PWS-2K02P-1R |
2 |
2000W Redundant platinum power supply |
Rear 2.5" HDD Kit |
MCP-220-84704-0N |
1 |
SC847D Rear 2.5" HDD Kit |
|