SYS-F627G3-FT+ |
- SuperServer F627G3-FT+ (Black)
|
|
CPU |
- Intel® Xeon® processor E5-2600 family
(up to 130W TDP)
- Dual Socket R (LGA 2011)
|
Cache |
|
System Bus |
|
GPU/Xeon Phi Support |
- 3x Double-width GPU/Xeon Phi per node
(total of 12x GPU/Xeon Phi cards in 4U)
- Supports NVIDIA M2090/M2075, Kepler (K10, K20M, K20X), or Xeon Phi
|
|
Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
Chipset |
|
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Graphics |
|
|
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB 2.0 ports; 1x internal Type A
|
VGA |
|
Serial Port / Header |
|
|
|
|
Width |
|
Height |
|
Depth |
|
Weight |
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
Available Colors |
|
|
Buttons |
- Power On/Off button
- UID button
|
LEDs |
- Power status LED
- System Overheat / Power Fail LED
- UID LED
|
|
PCI-Express |
- 3x PCI-E 3.0 x16 slots
(support 3x Double-width GPU/Xeon Phi)
- 2x PCI-E 3.0 x8 slots
|
|
Hot-swap |
- 2x 3.5" Hot-swap SATA HDD bays
|
|
Fans |
- 8x 8cm heavy duty fans with air shroud and PWM fan speed control
|
|
1620W high-efficiency redundant power supply w/ PMBus |
AC Input |
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
|
DC Output |
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
|
Certification |
Platinum Certified
[ Test Report ]
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|