SYS-8048B-C0R3FT |
- SuperServer 8048B-C0R3FT (Black)
|
|
CPU |
- Intel® Xeon® processor E5-2600 v4/v3 family (up to 145W TDP) *
- Quad Socket R3 (LGA 2011)
|
Cache |
|
System Bus |
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
|
Memory Type |
- 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
Chipset |
|
SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Graphics |
|
|
Serial ATA |
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
|
Serial Port / Header |
- 2x COM ports (1 rear, 1 Header)
|
VGA |
|
DOM |
- 2x SuperDOM (Disk on Module) ports
|
TPM |
|
|
BIOS Type |
- 16MB SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
Height |
|
Width |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
Hot-swap |
- 8x 3.5" Hot-swap Drive Bays
|
Hot-swap |
Others |
- 8x 3.5" Hot-swap Drive Bays
|
|
|
PCI-Express |
- 10x PCI-E 3.0 x8 slots
- 1x PCI-E 2.0 x4 (in x8) slot
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
|
Fans |
- 3x 8cm 7K RPM, Middle fans
- 1x 8cm 6.7K RPM, Rear Exhaust fan
|
|
850W/980W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus |
AC Input |
- 100-140 V, 50-60 Hz, 11.5-6.5 Amp
- 180-240 V, 50-60 Hz, 6.5-4.5 Amp
|
DC Output |
- 4 Amp @ +5V Standby
- 70 Amp @ +12V (100-140Vac)
- 81 Amp @ +12V (180-240Vac)
|
With Power Distributor |
- +5V: 30 Amp
- +3.3V: 28 Amp
- -12V: 0.6 Amp
|
Certification |
Platinum Level
|
|
CPU |
- Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
FAN |
- 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
Temperature |
- Monitoring for CPU and system environment
- Thermal Control for 9x fan connectors
|
Other Features |
- Chassis intrusion detection
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|