Integrated Board

X10DRU-i+

Available Colors :

Key Features
  • Flexible Connectivity Options
  1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
  2. Up to 1.5TB ECC, up to DDR4 2133MHz; 24x DIMM slots
  3. 6x PCI-E 3.0 x8 slots (4x FH, 10.5" L, 1x LP, 1x Internal LP)
  4. 4x 10GBase-T ports
  5. 24x Hot-swap 2.5" Drive Bays: Default 4x NVMe ports; 24x SAS3 ports via Expander and AOC: AOC-S3108L-H8iR, AOC-S3008L-L8e, AOC-S3008L-L8i
  6. 4x heavy duty fans w/ optimal fan speed control; 1x air shroud
  7. 1000W High efficiency (96%) Redundant PSU; Titanium Level

80 PLUS

Product SKUs
SYS-2028U-E1CNR4T+
  • SuperServer 2028U-E1CNR4T+ (Black)
 
Motherboard

Super X10DRU-i+
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 v3 family (up to 160W TDP) *
  • Dual Socket R3 (LGA 2011)
Cores / Cache
  • Up to 18 Cores / Up to 45MB Cache
System Bus
  • QPI up to 9.6 GT/s
Note * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
 
System Memory
Memory Capacity
  • 24x 288-pin DDR4 DIMM slots
  • Up to 1.5TB ECC LRDIMM, RDIMM
Memory Type
  • 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
  • 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
 
On-Board Devices
Chipset
  • Intel® C612 chipset
SATA
  • SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2400 BMC
Network Connectivity
  • 4x 10GBase-T ports
Graphics
  • ASPEED AST2400 BMC
 
Input / Output
SAS
  • 24x SAS3 ports support via expander and storage Add-on Cards
  • One of the following storage Add-on cards required:

    AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3)

    AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3)

    AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe
  • 4x NVMe ports
LAN
  • 4x RJ45 10GBase-T LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 5x USB 3.0 ports
    (2 rear, 2 onboard header, 1 Type A)
Video
  • 1x VGA Connector
Serial Port / Header
  • 1x Serial header
DOM
  • 2x Super DOM(Disk on Module) ports
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • SuperDoctor® 5
  • Intel® Node Manager 3.0
  • Watch Dog
  • NMI
  • SMCBU and SMM
  • Optional IPMI 1.5 / 2.0
Power Configurations
  • ACPI Power Management
  • Power-on mode for AC power recovery
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-219UE1C4-R1K02
 
Dimensions and Weight
Width
  • 17.2" (437mm)
Height
  • 3.5" (89mm)
Depth
  • 27.76" (705.3mm)
Weight
  • Net Weight: 36 lbs (16.4 kg)
  • Gross Weight: 72 lbs (32.7 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • System information (overheat/UID) LED
 
Expansion Slots
PCI-Express
  • Up to 6x PCI-E 3.0 x8 slots
    (4x FH, 10.5" L, 1x LP, 1x Internal LP)


  • (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
 
Drive Bays
Hot-swap
  • 24x 2.5" Hot-swap drive bays
  • Default 4x NVMe ports
  • 24x SAS3 ports support via Expander and AOC


  • Note: Storage Add-on card is required
 
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans
Shroud
  • 1x Air Shroud
 
Power Supply with Digital Switching Control
1000W Titanium Level (96%) High-efficiency Redundant Single Output Power Supplies
AC Input
  • 100-127 V, 50-60 Hz
  • 200-240 V, 50-60 Hz
+12V
  • Max: 62.5A & Min: 0A (100Vac-127Vac)
  • Max: 83A (200Vac-240Vac)
12V SB
  • Max: 2.1A
Certification Titanium Level96%    Titanium Level
    [Test Report]
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Support to monitor Supermicro AOC temperatures from IPMI or SD 5
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Memory DIMM ECC error LEDs
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • 4x 8-pin GPU power connectors
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC Support
  • RoHS
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10DRU-i+
CSE-219UE1C4-R1K02
1
1
Super X10DRU-i+ Motherboard
2U Chassis
Backplane BPN-SAS3-216EL1-N4 1 24 port SAS3 12G expander backplane, support up to 20x2.5
Cable 1 CBL-PWEX-0673 3 8 pin female to 2x big 4 pin female power, 65/70CM, 18AWG,RoHS/REACH
Cable 2 CBL-SAST-0593 2 Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s,HF,RoHS/REACH,PBF
Cable 3 CBL-SAST-0658 4 Internal Mini-SAS HD cable for PCIe SSD NVMe, 12Gb/s, 60cm,30AWG,RoHS/REACH
Riser Card RSC-R2UW-4E8 1 RSC-R2UW-4E8-O-P
Riser Card RSC-R1UW-E8R 1 RSC-R1UW-E8R-O-P
Heatsink / Retention SNK-P0058PSU 2 2U Passive CPU Heat Sink for X10 2U 24-DIMM Ultra Series Servers,RoHS/REACH
Power Supply PWS-1K02A-1R 2 1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH
Air Shroud MCP-310-81905-0B 1 Plastic air shroud for SC819U, 119U, 829U, 219U (PWS),RoHS/REACH
Drive Tray(s) MCP-220-00047-0B 24 Black gen 3rd hot-swap 2.5inch HDD tray
Air Shroud MCP-310-82908-0B 1 Mylar air shroud set for SC829U/219U, X10DRU+, L-Heatsink + GPU
Add-on Card AOC-2URN4-I4XT 1 2U Ultra Riser 10Gbase-T with NVMe ports
Mounting Rails MCP-290-00053-0N
MCP-290-00060-0N
1
1
Inner/outer rail set, quick-release type, 26.5" to 36.4"
Threaded rail adapter default for round hole rack
Optional Parts List
  Part Number Qty Description
Mounting Rails MCP-290-00053-0N
MCP-290-00060-0N
-
-
Inner/outer rail set, quick-release type, 26.5" to 36.4"
Threaded rail adapter default for round hole rack
Storage Control Card and Cable(s) AOC-S3008L-L8e
AOC-S3008L-L8i
AOC-S3108L-H8iR
-
-
-
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E
Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60
Network Card(s) AOC-S40G-i2Q
AOC-SGP-i2
AOC-SGP-i4
AOC-STG-b4S
AOC-STGN-i2S
AOC-STGN-i1S
AOC-STG-i2T
AOC-STG-i2
-
-
-
-
-
-
-
-
Standard LP 2-port 40GbE controller, based on Intel Fortville XL710
Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2
Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350
Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S
Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES
Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN
Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540
Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB
CachVault(s) BTR-CV3108-U1
BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05
BTR-TFM8G-LSICVM02 & MCP-240-00127-0N
-
-
 
-
 
CacheVault for LSI 3108 with Supercap mounting for 2U Ultra
CacheVault for LSI 3108; Supercap mounting bracket for PCI-E location
CacheVault for LSI 3108; Supercap mounting bracket for 2.5" HDD location
Onsite Service Program OS4HR3/2/1 - 3/2/1-year onsite 24x7x4 service
Onsite Service Program OSNBD3/2/1 - 3/2/1-year onsite NBD service
Software SFT-OOB-LIC 1 OOB Management Package (per node license)
Software SFT-DCMS-Single 1 DataCenter Management Package (per node license)