|
| SYS-2028R-C1R4+ |
- SuperServer 2028R-C1R4+ (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 18 Cores / Up to 45MB Cache
|
| System Bus |
|
| Note |
- ** Please contact your Supermicro sales representative for additional details.
|
| |
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| Chipset |
- Intel® C612 Express chipset
|
| SATA |
- SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
|
| SAS |
- LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® i350 Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Video |
|
| |
| SATA |
|
| SAS |
- 8x SAS3 (12Gbps) ports
- SuperCap option support
|
| LAN |
- 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 3.0 ports (rear)
- 4x USB 2.0 ports (2 rear, 2 front)
- 1x Type A
|
| Video |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial
- 2x COM Ports (1 rear, 1 front)
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with UEFI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 10.5" (H) x 26.5" (W) x 38" (D)
|
| Weight |
- Net Weight: 38.5 lbs (17.5 kg)
- Gross Weight: 63.5 lbs (28.8 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
|
| PCI-Express |
- 2x PCI-E 3.0 x16
- 3x PCI-E 3.0 x8
- 1x PCI-E 2.0 x4 (in x8)
|
| |
|
| Hot-swap |
- 8x 2.5" and 8x 2.5" Hot-swap drive bays
|
| |
|
| Fans |
- 3x 8cm heavy duty fans with optimal fan speed control
|
| |
|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| Certification |
Platinum Certified
[ Test Report ]
|
| |
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of five 4-pin PWM fans
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
No Infomation
