SYS-2028GR-TR |
- SuperServer 2028GR-TR (Black)
|
|
CPU |
- Intel® Xeon® processor E5-2600 v4/v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores / Up to 55MB Cache
|
System Bus |
|
Note |
- ** Please contact your Supermicro sales representative for additional details.
|
GPU/Xeon Phi Support |
|
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
Memory Type |
- 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
Chipset |
- Intel® C612 Express chipset
|
SATA |
- Intel C612 Controller
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 1GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
Video |
|
|
SATA |
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 4x USB 3.0 ports (2 rear, 2 via header)
- 2x USB 2.0 ports (2 via headers)
|
Video |
|
Serial Port |
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
|
|
Width |
|
Height |
|
Depth |
|
Package |
- 26.5" (H) x 11" (W) x 44.5" (D)
|
Weight |
- Net Weight: 39.5 lbs (17.9 kg)
- Gross Weight: 54 lbs (24.5 kg)
|
Available Colors |
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
PCI-Express |
- 4x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, option)
- 1x PCI-E 3.0 x8 (in x16) low-profile slot
|
|
Hot-swap |
- 10x 2.5" Hot-swap drive bays
|
|
Fans |
- 5x 8cm heavy duty fans with optimal fan speed control
|
|
2000W 1U Redundant Power Supply |
AC Input |
- 1000W @ 100-120V, 12.5A Max., 50-60Hz
- 2000W @ 200-240V, 10A Max., 50-60Hz
|
DC Output |
- 1000W: +12V/83.3A; +12Vsb/3.5A
- 2000W: +12V/166.7A; +12Vsb/3.5A
|
Certification |
Platinum Level
[ Cert. in progress ]
|
|
CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- 5 Phase-switching voltage regulator
|
FAN |
- Total of five 4-pin PWM fans
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
Other Features |
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|