Home제품정보 Super Server New!2U RackmountDP XeonE5500/E5600

SYS-2026TT-DLRF

견적상담제품문의

Integrated Board

No Infomation

Available Colors : Black

Key Features
  • Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following :
  1. Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  2. 12 DIMM, up to 192GB DDR3 1333/ 1066/800 MHz ECC Reg. memory
  3. 2 (x8) PCI-E 2.0 (in x16, low-profile)
  4. Integrated IPMI 2.0 with KVM and Dedicated LAN
  5. Dual Intel 82574L Gigabit Ethernet Controller
  6. 12x 2.5" Hot-swap HDDs (24 total)
  7. One LSI 2008 adapter card
  8. 1400W Gold-level High-efficiency Redundant Power Supply

Redundant Power RoHS 80 PLUS

Product SKUs
SYS-2026TT-DLRF
  • SuperServer 2026TT-DLRF (Black)
 
Motherboard

2x Super X8DTT-HEF+
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W
       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W
       
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB** , 16GB**
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices (per Node)
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SAS
  • LSI 6Gbps SAS 2008 IT Mode BPN-ADP-E16-L
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output (per Node)
SAS
  • 6x SAS ports
  • 6x SAS hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
 
System BIOS (per Node)
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-217HD-R1400B
 
Dimensions
Height 3.5" (88mm)
Width 17.2" (438mm)
Depth 26.75" (679mm)
Gross Weight 85 lbs (38.6kg)
Available Colors Black
 
Front Panel (per Node)
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)
 
Expansion Slots (per Node)
PCI-Express
  • 2 (x8) PCI-E 2.0 (in x16, low-profile)
 
Drive Bays (per Node)
Hot-swap
  • 12x 2.5" Hot-swap drive bays
 
Hard drive Backplane
2U Hard drive Backplane for 24x 2.5" HDD
 
System Cooling
Fans
  • 4x 8cm 9.5K RPM 4-pin PWM Cooling Fans
 
Power Supply
1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input
  • 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
  • 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output
  • 1100W: +12V/92A; +5Vsb/4A
  • 1400W: +12V/116A; +5Vsb/4A
With Distributor
  • +5V: 30 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Gold Level Certified
  Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8DTT-HEF+
CSE-217HD-R1400B 		2
1		 Super X8DTT-HEF+ Motherboard
2U Black Chassis
Backplane BPN-SAS-217HD 1 24pcs 2.5" HDD for two node CSE-217HD
Drive Trays MCP-220-00047-0B 24 Black gen 3 hot swap 2.5" HDD tray
Air Shroud MCP-310-82708-0B 2 Mylar air shroud for SC827HD 2U Heat sink version
CD CDR-X8 1 For X8 series
Riser Card RSC-R2UT-2E8R 2 RSC-R2UT-2E8R-O-P
Heatsink / Retention SNK-P0038PS 4 2U+ PASSIVE CPU HS FOR INTEL 2U TWIN SERVERS
Power Supply PWS-1K41P-1R 2 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3
SAS Adaptor Card BPN-ADP-E16-L 2 BPN-ADP-E16-L