Integrated Board

No Infomation

Available Colors : Black

Key Features
  • Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
  1. Dual socket B2 (LGA 1356) supports Intel® Xeon® processor E5-2400 v2
  2. Up to 192GB DDR3 1600MHz ECC reg. DIMM; 6x DIMM sockets (3 per CPU)
  3. 3x PCI-E 3.0 slots per node (can be used for host or storage expansion)
  4. I/O ports: 2 GbE LAN (1 for IPMI 2.0 w/ Virtual Media/KVM over LAN), SAS 2.0 (6Gbps) x1 JBOD ports
  5. Dedicated node to node connectivity featuring high performance PCI-E 3.0 x8 and IPMI for robust node fail-over support
  6. 24x Hot-swap 2.5" SAS2 HDD bays Internal 2x SAS/SATA ports for OS load on SLC SATA DOM
  7. 920W Redundant Power Supplies Platinum Level Certified

Digital Power RoHS 80 PLUS

Product SKUs
SSG-2027B-DE2R24L
  • SuperStorage 2027B-DE2R24L (Black)
Motherboard
2x Super X9DBS-F-2U
Processor/Cache
CPU
  • Dual Socket B2 (LGA 1356)
  • Intel® Xeon® processor E5-2400 v2
  • Up to 95W TDP
Cache
  • Up to 25MB
System Bus
  • QPI up to 8 GT/s
System Memory (per Node)
Memory Capacity
  • 6x 240-pin DIMM sockets
  • Supports up to 192GB DDR3 ECC Registered memory
  • Memory Mirroring supported
Memory Type
  • 1866/1600/1333/1066/800MHz ECC Registered /
    ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • NVDIMM support. (Not all vendor's NVDIMM are supported.
    Please contact your sales representative for details)
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB , 32GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset
  • Intel® C602J chipset
SAS/SATA*
  • LSI 2308 SAS2 (6Gbps)
SAS2 Expander
  • Scalability through cascading
  • 6Gb SAS2/SATA2 HDD support
  • Inband SES-2 Enclosure Management
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual-Port Gigabit Ethernet Controller
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond 83527HF chip
Others
  • PCI-E 3.0 x8 node to node/NTB connectivity
  • PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
Expansion Slots (per Node)
PCI-Express
  • 3x PCI-E 3.0 x8 slots (on riser)
Input / Output (per node)
SAS
  • 2x JBOD expansion ports per node (mini-SAS HD)
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports (via KVM cable)
  • 1x USB on-board (TypeA)
VGA
  • 1x VGA Port (via KVM cable)
Serial Port / Header
  • 1x console port (via KVM cable); Board to Board serial port connection available for management
System BIOS
BIOS Type
  • 16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.3
  • ACPI up to 5.0
  • USB Keyboard support
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-927ETS
Dimensions
Height
  • 3.5" (88mm)
Width
  • 17.2" (437mm)
Depth
  • 26.75" (679mm)
Gross Weight
  • 85 lbs (38.6 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
  • Alarm Mute Switch
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power fail LED
Drive Bays
Hot-swap
  • 24x Hot-swap 2.5" Drive Bays shared between server nodes
  • SAS or enterprise SATA HDD only recommended
  • SATA drives require LSI interposer
Backplane
SAS2 dual Expander Backplane, features:
  • Scalability through cascading
  • 6Gb SAS2/SATA2 HDD support
  • Inband SES-2 Enclosure Management
  • Redundancy dual ported SAS architecture
  • Robust AirMax server node connections (SBB specification)
System Cooling
Fans
  • 10x PWM Fans
Power Supply with Power Distributor
920W high-efficiency AC-DC Redundant power supplies with PMBus and I2C
AC Input
  • 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
  • 4 Amp @ +5V standby
  • 75 Amp @ +12V
With Power Distributor
  • +5V: 45 Amp
  • +3.3V: 24 Amp
  • -12V: 0.6 Amp
Certification Platinum Level Certified 95%+
  Platinum Certified
  [ Test Report ]
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Voltages.
  • 5+1-switching voltage regulator
FAN
  • Total of 12 fan headers supporting up to 10 fans
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 10x fan connectors
  • PECI
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
Part Number Qty Description
Motherboard / Chassis MBD-X9DBS-F-2U
CSE-927ETS
2
1
Super X9DBS-F-2U Motherboard
2U Chassis
Add-On Card AOM-S2308-L8I-SB-O-P 2 AOM-S2308-L8i-SB
Backplane BPN-SAS-927 1 SC927 24 x 2.5HDD BPN
Cable 1 CBL-0218L 2 11.5CM KVM/SUVI 36 PIN TO 9 PIN/15 PIN 2USB, 30/28AWG
Cable 2 CBL-0160L 2 NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
CD CDR-X9 1 Driver CD for X9 series
Power Distributor PDB-PT927-SG 2 SC927 PDB Input +12V and 5Vsb and output with additional 5V
Power Supply PWS-920P-SQ 2 920W 1U Redundant PWS W/ Quiet Mode
Riser Card RSC-R2US-3E8R-O-P 2 RSC-R2US-3E8R
Heatsink / Retention SNK-P0037P 2 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Heatsink / Retention SNK-P0038P 2 2U+ PASSIVE CPU HS FOR INTEL LGA1366 X8 MB
Cable 3 CBL-0217L 2 16 pin control panel converter cable for SC826,846, 22cm, PBF
Mounting Rails MCP-290-00057-0N 1 Rail set, quick/quick, default for 4U 17.2
Fan FAN-0088L4 10 40x56, 4 PIn PWM Fan Assembly for SC513F, 515, 823M
Tray(s) MCP-220-92701-0N 24 Support 2.5�SATA/SAS/SSD HDD tray with LSI converter bkt
Tray(s) MCP-220-92702-0N 1 SC927 2U motherboard tray supporting 3LP
Optional Parts List
  Part Number Qty Description
Add-on Card AOC-LSISS9252 - L3-25111-00C LSISS9252 SAS-TO-SATA INTERPOSER, 2.5"/3.5" HD
Cable CBL-SAST-0547 - 0.5m external Mini SAS HD to external IPASS. 30AWG,HF,RoHS/REACH,PBF
Cable CBL-SAST-0548 - 1m external Mini SAS HD to external IPASS. 28AWG,HF,RoHS/REACH,PBF
Cable CBL-SAST-0549 - 3m external Mini SAS HD to external IPASS. 28AWG,HF,RoHS/REACH,PBF