Integrated Board

No Infomation

Available Colors : Black

Key Features
  • Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following :
  1. Intel Xeon processor E5-2600 family; QPI up to 8GT/s
  2. Up to 256GB DDR3 1600MHz ECC Registered DIMM; 8x DIMM sockets
  3. 3x PCI-E 3.0 (x8) slots (1x low-profile and 2x full-height full-length)
  4. Intel i350 Dual port Gigabit Ethernet
  5. 6x Hot-swap 3.5" SATA3/SAS HDD Bays
  6. Onboard Mellanox ConnectX FDR InfiniBand Controller, QSFP interface
  7. 1280W Redundant Power Supplies Platinum Level (94%)
  8. Support 1 Full-height Full-length PCI-E x16 GPU card per node w/ GPU Kit

Redundant Power RoHS 80 PLUS

Product SKUs
SYS-6027TR-D70FRF
  • SuperServer 6027TR-D70FRF (Black)
 
Motherboard

Super X9DRT-HIBFF
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600 (up to 135W TDP *)
  • Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
 
System Memory
Memory Capacity
  • 8x 240-pin DDR3 DIMM sockets
  • Supports up to 256 GB DDR3 ECC Registered memory (RDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 Chipset
Infiniband
  • Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller
SAS
  • LSI 2008 SAS (6Gbps)
  • RAID 0, 1, 10 support
  • (Optional: AOC-SAS2-RAID5-KEY) RAID 5 support
  • Note: In order to support the LSI RAID Controllers, both CPU socket must be populated
SATA
  • SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
 
Input / Output (per Node)
Serial ATA
  • 2x SATA 3.0 ports (6Gbps)
  • 5x SATA 2.0 ports (3Gbps)
SAS
  • 8x SAS ports (6Gbps)
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 3x USB 2.0 ports total
    (2x rear + 1x Type A)
VGA
  • 1x VGA port
Serial Port / Header
  • 1x Fast UART 16550 port / 1 Header
Infiniband
  • 1 external QSFP Infiniband connector
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-827HD-R1K28B
 
Dimensions
Width
  • 17.25" (438mm)
Height
  • 3.47" (88mm)
Depth
  • 28.5" (724mm)
Gross Weight
  • 85 lbs (38.6kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
  • Universal Information (UID) LED
 
Expansion Slots (per Node)
PCI-Express
  • 3x PCI-E 3.0 (x8) slots (1x Low-profile and 2x Full-height Full-length)
 
Drive Bays (per Node)
Hot-swap
  • 6x Hot-swap 3.5" SATA3/SAS2 HDD trays
 
System Cooling
Fans
  • 4x 8cm heavy duty PWM fans with optimal fan speed control
 
Power Supply
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input
  • 1000W Output @ 100-140V, 12-8A, 50-60Hz
  • 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
  • 1000W: +12V/83A; +5Vsb/4A
  • 1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Level Certified95%+
  Platinum Certified
  [ Test Report ]
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
  • UEFI
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9DRT-HIBFF
CSE-827HD-R1K28B
2
1
Super X9DRT-HIBFF Motherboard
2U Chassis
Backplane BPN-ADP-SAS2-L6I-O-P 2 BPN,BPN-ADP-SAS2-L6i,LSI2008,PBF
Backplane BPN-SAS-827HD 1 Sup 6x3.5ö SATA hdd; hot swap
CD CDR-X9 1 Driver CD for X9 series
Riser Card RSC-R2UT-3E8R-O-P 2 2U RHS Riser Card with 3 PCI-E x8 for X9DRT-HF Twin MBs
Heatsink / Retention SNK-P0048PS 2 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM
Heatsink / Retention SNK-P0048PW 2 2U Passive Rear CPU Heat Sink for X9 2U Twin Series Servers
Power Supply PWS-1K28P-SQ 2 1U 1280W, redundant single output power supply
Optional Parts List
  Part Number Qty Description
GPU kit MCP-420-21709-0N - Complete CSE-217HD GPU kit with single packaging