Integrated Board

X10SDV-8C-TLN4F

Available Colors : Black

Key Features
  • Front I/O
  • Space-efficient, compact design
  • Less than 10" depth
  • Best Performance per Watt
  • Fast to build and deploy
  1. Intel® Xeon® processor D-1540, Single socket FCBGA 1667; 8-Core, 45W
  2. 2x 3.5" or 4x 2.5" SATA3 drive bays; 3.5" peripheral bay, 2.5" optional
  3. 1x PCI-E 3.0 x16 slot
  4. Up to 128GB ECC RDIMM DDR4 2133MHz or 64GB ECC/non-ECC UDIMM in 4 sockets
  5. Dual 10GbE LAN and Intel® i350-AM2 dual port GbE LAN
  6. DOM power connector
  7. 200W Low-noise power supply w/ PFC

80 PLUS

Product SKUs
SYS-5018D-FN4T
  • SuperServer 5018D-FN4T (Black)
 
Motherboard

Super X10SDV-8C-TLN4F
 
Processor/Cache
CPU
  • Intel® Xeon® processor D-1540
  • FCBGA 1667 supported
  • CPU TDP support 45W
  • System-on-Chip
 
System Memory
Memory Capacity
  • 4x DDR4 DIMM sockets
  • Supports up to 128GB DDR4 ECC RDIMM
  • Supports up to 64GB DDR4 ECC/non-ECC UDIMM
Memory Type
  • 2133/1600/1333MHz ECC DDR4 SDRAM
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors
      (using ECC memory)
 
On-Board Devices
SATA
  • SoC controller for SATA3 (6Gbps) ports
Network Controllers
  • Dual LAN via Intel® i350-AM2 Gigabit Ethernet
  • Dual LAN via SoC 10GBase-T
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • BMC integrated ASPEED AST2400
 
Input / Output
SATA
  • 6x SATA3 (6Gbps) ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 2x RJ45 10GBase-T ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (rear)
Serial Port
  • 2x Fast UART 16550 Serial Port (1 rear, 1 via header)
DOM
  • 1x SATA DOM (Disk on Module) power connector
VGA
  • 1x VGA Port
Others
  • TPM 1.2 header
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-505-203B
 
Dimensions and Weight
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 9.8" (249mm)
Weight
  • Net Weight: 8 lbs (3.62 kg)
  • Gross Weight: 12 lbs (5.44 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Information LED (temp., status)
 
Expansion Slots
PCI-E
  • 1x PCI-E 3.0 x16 slot
 
Drive Bays
HDD
  • 2x 3.5" or 4x 2.5" internal SATA2 hard
      drive bays (optional) *
 
System Cooling
Fans
  • Active CPU fan, 40mm chassis fan
 
Power Supply
200W Low Noise AC-DC power supply with PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 2.6 Amp Max
+5V
  • 8.0 Amp (max.)
+5V standby
  • 2.0 Amp (max.)
+12V
  • 16 Amp (max.)
-12V
  • 0.5 Amp (max.)
+3.3V
  • 8.0 Amp (max.)
Certification Gold Level Certified
  Gold Certified
 
 
System BIOS
BIOS Type
  • 64Mb SPI Flash EEPROM with AMI UEFI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
  • SMBIOS 2.7.1
  • UEFI
  • RTC (Real Time Clock) Wakeup
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X10SDV-8C-TLN4F
CSE-505-203B
1
1
Super X10SDV-8C-TLN4F Motherboard
1U Chassis
Cable 1 CBL-0061L 1 35CM end to end, SATA CABLE, PB FREE, 26AWG, flat
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PCI-E x16 output
Power Supply PWS-203-1H 1 1U 200W Multi-output 80Plus Gold PWS
Cable 2 CBL-0087 1 Front Control Cable Round 16 pin to 16 pin Ribbon 20
Cable 3 CBL-0260L 1 US power cord 18AWG 6ft, PBF (default for low watt)
Part MCP-120-00063-0N 1 Riser card bracket for slot-7 in SC504
Optional Parts List
  Part Number Qty Description
HDD Bracket MCP-220-00044-0N - Retention Bracket for up to 2x 2.5" HDD
HDD Bracket MCP-220-00051-0N - Retention Bracket for 1 x 2.5" HDD