|
| SYS-1019S-M2 |
- SuperServer 1019S-M2 (Black)
|
| |
|
| CPU |
-
Intel® 6th Gen Core i7/i5/i3 series, Intel® Celeron®, Intel® Pentium® processors; CPU TDP support up to 95W TDP
- Single Socket H4 (LGA 1151)
|
| |
| Memory Capacity |
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4
Non-ECC UDIMM
|
| Memory Type |
- 2133/1866/1600MHz
Non-ECC DDR4 SDRAM 72-bit,
288-pin
(UDIMM) gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| |
| Chipset |
- Intel® Q170 Express chipset
|
| SATA |
- SATA3 (6Gbps) via Intel® Q170 Express controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® PHY i219LM + Intel® i210AT Gigabit Ethernet LAN Controllers
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- RealTek ALC 888S High Definition Audio
|
| Video |
- ASPEED AST2400 BMC and Intel HD Graphics 530
|
| |
| SATA |
- 2x SATA3 (6Gbps) ports; RAID 0, 1
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 3.0 ports (2 rear)
- 3x USB 2.0 ports (2 rear + 1 Type A)
|
| Audio |
|
| Video/Display |
- 2x DP (Display Port), 1x DVI-I from Intel® HD Graphics, 1x VGA from AST2400
- 3x Independent Displays from Processor Graphics, VGA is from AST2400 for BMC KVM
|
| Serial Port / Header |
|
| SuperDOM |
- 1x SuperDOM (Disk on Module) ports with built-in power
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 3.0
- ACPI 5.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 3.0
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
| |
| Software |
- AMT
- IPMI 2.0 with KVM support
- NMI
- vPro
- Watch Dog
- SuperDoctor® 5
|
| Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Package |
- 8" (H) x 24" (W) x 24" (D)
|
| Weight |
- Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
| PCI-Express |
- 1x PCI-E 3.0 x16 (in x16) slot
|
| |
|
| Internal |
- 2x 2.5" Fixed SATA3 drive bays
|
| |
|
| Fans |
- 4x 40x56mm PWM fan; 2x fans for AOC cooling
|
| |
|
| 400W Platinum level power supply with PMBus and I2C |
| AC Input |
- 400W: 100-240 V, 50-60 Hz
|
DC Output
+5V standby |
|
DC Output
+12V |
|
| Certification |
Platinum Level
|
| |
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
|
| FAN |
- Total of 6 fan headers supporting up to 6 fans
- 6 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
