|
| SYS-5016T-MTFB |
- SuperServer 5016T-MTFB (Black)
|
| |
| CPU |
- LGA 1366 Socket
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP) - NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts)
|
| System Bus |
|
| |
| Memory Capacity |
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type |
- 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512MB, 1GB, 2GB, 4GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset |
- Intel® X58 Express chipset
- ICH10R
|
| SATA |
- Intel ICH10R SATA (3.0Gbps) Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- 2x Intel® Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| Clock Generator |
|
| |
| PCI-Express |
- 1 (x16) PCI-E 2.0 slot via riser card
- UIO AOC Compatibility Matrix
|
| |
| Serial ATA |
- Six SATA ports
- Six SATA hard drives supported
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
| |
| BIOS Type |
- 4Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
| Form Factor |
|
| Model |
- SC813MTQ-280CB
(Chassis not sold separately)
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
|
| Ports |
- 2x Front USB Ports
- 1x Serial COM Port
|
| |
|
| Hot-swap |
- 4x 3.5" SATA Hot-swap drive bays
|
| |
|
| 280W AC power supply w/ PFC |
| AC Voltage |
- 100 - 240V, 50 - 60Hz, 5Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
- 23Amp @ 100-140V, 27Amp @ 180-240V
|
| -12V |
|
| +3.3V |
|
| |
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
RoHS
|
- RoHS Compliant 6/6, Pb Free
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
