-
Integrated Board
Available Colors :
-
Key Features
- Single socket H2 (LGA 1155) supports Intel Xeon E3-1200 & v2 series, 2nd Gen Core i3 processors*
- Intel C202 PCH Chipset
- 4x 3.5" Hot-swap SATA2 HDDs
- 1x PCI-E 3.0* x8 Full-height slot
- Up to 32GB DDR3 ECC 1333MHz / 1600MHz* UDIMMs in 4 sockets
- Intel 82579LM and 82574L, 2x Gigabit Ethernet LAN ports
- IPMI 2.0 on Dedicated LAN port
- 6x SATA 2.0 with RAID 0, 1, 5, 10
- 350W Gold Level Power Supply
- Disk-on-module (DOM) power connector
|
|
Parts List - (Items Included) | |||
Part Number | Qty | Description | |
Motherboard / Chassis | MBD-X9SCL-F CSE-813MTQ-350CB |
1 1 |
Super X9SCL-F Motherboard 1U Chassis |
Backplane | BPN-SAS-815TQ | 1 | BPN-SAS-815TQ-O-P |
Cable 1 | CBL-0157L | 1 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF |
Cable 2 | CBL-0186L | 1 | SET OF 4 SATA 56/45.5/35/23CM ROUND S-RA. 26AWG |
Riser Card | RSC-RR1U-E8 | 1 | RSC-RR1U-E8 (Rev 3.10) |
Heatsink / Retention | SNK-P0046P | 1 | 1U PASSIVE CPU HS FOR INTEL LGA1156 |
Power Supply | PWS-351-1H | 1 | 1U 350W MULTI OUTPUT 80PLUS GOLD PWS |
Cable 3 | CBL-0049L | 1 | Front ctrl cable 16 PIN TO 16 PIN, LF, Flat (L=54cm) |
Fan 1 | FAN-0065L4 | 4 | 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M |
Drive Tray(s) | MCP-220-00093-0B | 4 | Black 3.5 |
Mounting Rails | CSE-PT52 | 1 set | THIRD GENERATION GUIDE RAIL ASSY. Outer slides extendable length: 26" to 33.5" |
* BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600.
^ Per Intel's spec, for platforms using C202/C204 PCH:
1) Intel i5/i7 CPUs are not supported
2) Intel E3-12x5 series processors which have integrated graphics support are not supported