Integrated Board

X9SCL-F

Available Colors : Black

Key Features
  1. Single socket H2 (LGA 1155) supports Intel Xeon E3-1200 & v2 series, 2nd Gen Core i3 processors*
  2. Intel C202 PCH Chipset
  3. 1x 3.5" or optional 2x 2.5" internal SATA2 hard drive bays
  4. 1x PCI-E 3.0* x8 Low-profile slot
  5. Up to 32GB DDR3 ECC 1333MHz / 1600MHz* UDIMMs in 4 sockets
  6. Intel 82579LM and 82574L, 2x Gigabit Ethernet LAN ports
  7. IPMI 2.0 on Dedicated LAN port
  8. 200W Low-noise power supply w/ PFC
  9. Disk-on-module (DOM) power connector

RoHS icon_server_2012_cert

Product SKUs
SYS-5017C-LF
  • SuperServer 5017C-LF (Black)
 
Motherboard
Super X9SCL-F
 
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors * ^
  • Socket H2 (LGA 1155)
 
  • NOTE: Supports CPU models E3-1220L, E3-1220LV2, E3-1260L, with max. TDP ≤ 45W
 
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C202 PCH chipset
SATA
  • 6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82579LM and Intel® 82574L,
    2x Gigabit Ethernet LAN ports
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
  • Nuvoton WPCM450RA0BX
Super I/O
  • Nuvoton NCT6776F
 
Input / Output
Serial ATA
  • 6 SATA 2.0 ports
  • Up to 2 SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB Type-A
  • 6x USB ports via header
  • Total 9 USB 2.0 Compliant
VGA
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 serial ports
     (one header and one rear port)
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-510L-200B
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 11.3" (287mm)
Gross Weight
  • 11 lbs (4.99 kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0* x8 Low-profile slot
 
Drive Bays
HDD
  • 1x 3.5" or optional 2x 2.5" internal SATA2
      hard drive bays
 
Peripheral Drives
 
Backplane
SAS/SATA HDD Backplane
(SAS support requires optional SAS controller)
 
System Cooling
Fans
  • 2x 8500 RPM 40x28mm PWM cooling fans
 
Power Supply
200W Low Noise AC-DC power supply with PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 3-1.5 Amp Max
+5V
  • 16.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 15.0 Amp
-12V
  • 0.8 Amp
+3.3V
  • 17.0 Amp
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • PCI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X9SCL-F
CSE-510L-200B
1
1
Super X9SCL-F Motherboard
1U Chassis
Cable 1 CBL-0315L 1 35CM SATA FLAT S-S W/ LATCH PBF
Riser Card RSC-RR1U-E8 1 RSC-RR1U-E8 (Rev 3.10)
Heatsink / Retention SNK-P0046P 1 1U PASSIVE CPU HS FOR INTEL LGA1156
Power Supply PWS-202-1H 1 200W,1U W/ STANDARD HARNESS OUTPUT LC
Cable 2 CBL-0087 1 Front Control Cable Round 16 pin to 16 pin Ribbon 20\" (50cm), 28AWG
Cable 3 CBL-0160L 1 NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt)
Fan 1 FAN-0106L4 2 High current (0.14A) version of Fan-0100L4 (40x28mm PWM)
BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600.
^ Per Intel's spec, for platforms using C202/C204 PCH:
1) Intel i5/i7 CPUs are not supported
2) Intel E3-12x5 series processors which have integrated graphics support are not supported