|
| SYS-5018D-MTLN4F |
- SuperServer 5018D-MTLN4F (Black)
|
| |
| CPU |
- Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
| |
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| Chipset |
|
| SATA |
- SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
- SATA2 (3Gbps) w/ RAID 0, 1
- SATA DOM Power Connector
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Aspeed AST2400 BMC with 10/100/1000Mbps
|
| Network Controllers |
- Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| |
| Serial ATA |
- 4x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
|
| LAN |
- 4x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header)
- 6x USB 2.0 ports (2 rear, 4 via header)
|
| VGA |
|
| Serial Port / Header |
- 2 COM ports (1 rear, 1 header)
|
| |
| Voltage |
- Monitors for CPU Cores, 12V, +3.3V, +5V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of Five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
- Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 4x Network activity LEDs
- System Overheat LED
|
| Ports |
- 2x USB ports
- 1x Serial COM Port
|
| |
| PCI-Express |
- 1x PCI-E 3.0 x16 Full-height slot
|
| |
|
| Hot-swap |
- 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
|
| Peripheral Bay |
- Slim optical drive (optional)
|
| |
|
SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller) |
| |
|
| Fans |
- 4x 4cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
|
| |
|
| 350W AC power supply w/ PFC |
| AC Voltage |
- 100-240 V, 50-60 Hz, 4.2-1.8 Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| +3.3V |
|
| Certification |
Gold Certified
|
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
RoHS
|
- RoHS2 (2011/65/EU) Compliant
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
