|
| SYS-1028R-WC1RT |
- SuperServer 1028R-WC1RT (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Core / Cache |
- Up to 18 Cores / Up to 45MB Cache
|
| System Bus |
|
| Note |
- ** Please contact your Supermicro sales representative for additional details.
|
| |
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| Chipset |
|
| SATA |
- SATA3 via Intel® C610; RAID 0, 1
|
| SAS |
- SAS3 (12Gbps) via LSI 3108
- RAID 0, 1, 5, 6, 10, 50, 60 support
- 2GB DDR3 Cache
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics |
|
| |
| Serial ATA |
|
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 6x USB 3.0 ports (4 rear + 2 via header)
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 header
|
| DOM |
- 2x SuperDOM (Disk on Module) ports
|
| |
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 6x 4-pin fan headers (up to 6 fans)
- 6x fans with tachometer monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
|
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 full-height, Half-length slots
|
| |
|
| Hot-swap |
- 10 Hot-swap 2.5" SAS / SATA HDD trays (connected to onboard storage controller)
|
| |
|
| SAS/SATA HDD Backplane Optional 2x 2.5" NVMe drives |
| |
|
| Fans |
- 5x 4cm heavy-duty counter-rotating fans w/ air shroud and optimal fan speed control
|
| |
|
| 700W/750W Redundant AC-DC high-efficiency power supply with PMBus and I2C |
| AC Voltage |
- 700W: 100 - 140V, 50-60 Hz
- 750W: 200 - 240V, 50-60 Hz
|
| DC Output +5V standby |
|
| DC Output +12V |
- 700W: 58 Amp @ 100-140V
- 750W: 62 Amp @ 200-240V
|
| Certification |
Platinum Certified
[ Cert. in progress ]
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- Intel Node Manager
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
No Infomation
