Integrated Board

X8DTL-3

Available Colors : Black

Key Features
  1. Intel Xeon processor 5600/5500 series, with QPI up to 6.4 GT/s
  2. Up to 48GB** DDR3 1333/ 1066/ 800MHz ECC Registered / 24GB Unbuffered DIMM
  3. 1 (x8) PCI-E 2.0 Slot
  4. Dual Intel 82574L Gigabit Ethernet Controller
  5. 8 x 2.5" Hot-swap SAS Drive Trays
  6. 560W High-efficiency Power Supply

RoHS 80 PLUS

Product SKUs
SYS-1026T-M3
  • SuperServer 1026T-M3 (Black)
 
Motherboard
Super X8DTL-3
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
     
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 95W

       
    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

       
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 6x 240-pin DIMM sockets
  • Supports up to 48 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB**
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
Chipset
  • Intel® 5500 (Tylersburg) chipset
  • ICH10R + IOH-24D
SAS
    • LSI SAS1068E
    • RAID 0, 1, 10 support
    • (Optional: AOC-IButton68) RAID 5 support
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
Network Controllers
  • 2x Intel® 82574L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • Matrox G200eW
Super I/O
  • Winbond 83827HF chip
 
Input / Output
SAS
  • 8 SAS / SATA ports
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 2x USB internal headers
  • Total 6 USB 2.0 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-113MTQ-560CB
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 20" (508mm)
Gross Weight
  • 10 lbs (4.5kg)
Available Colors
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power status LED
  • HDD activity LED
  • 2x Network activity LEDs
 
Expansion Slots
PCI-Express
  • 1 (x8) PCI-E 2.0 slot
 
Drive Bays
Hot-swap
  • 8x 2.5" Hot-swap SAS / SATA drive bays
 
SAS / SATA Backplane
1x SAS / SATA Backplane
 
System Cooling
Fans
  • 4x 40x28mm high-efficiency fans
  • 6x fans maximum
 
Power Supply
560W AC to DC power supply w/ PFC
AC Voltage
  • 100-240 V, 50-60 Hz, 6.5-2.6 Amp
+5V
  • 15 Amp
+5V standby
  • 2 Amp
+12V
  • 46.5 Amp
-12V
  • 0.5 Amp
+3.3V
  • 15 Amp
Certification Silver Level
  Silver Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 4-Phase-switching voltage regulator
FAN
  • Total of six fan headers supporting up to 6 fans
  • Six 4-pin fan headers
  • 6x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 6x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8DTL-3
CSE-113MTQ-560CB
1
1
Super X8DTL-3 Motherboard
1U Chassis (B = Black)
Air Shroud MCP-310-18003-0N 1 1U Air Shroud
Backplane BPN-SAS-113TQ 1 Sup 8x2.5" Hot-swap SAS/SATA hdd; SATA con
Cable 1 CBL-0044L 1 SATA CABLE 61CM FLAT S-S PBF. 26AWG flat
Cable 2 CBL-0157L 2 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF
Cable 3 CBL-0190L 2 SATA SET OF 4-43/33/26/22CM ROUND S-S, PBF. 26AWG
Cable 4 CBL-0206L 1 48CM SATA ROUND S-S PBF. 26AWG
Adapter CDM-PSATA 1 mini-IDE to SATA adapter for slim DVD
CD CDR-X8 1 For X8 series
Riser Card RSC-RR1U-E16 1 RSC-RR1U-E16 with PCI-E x16 output
Heatsink / Retention SNK-P0037P 1 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Heatsink / Retention SNK-P0041 1 1U PASSIVE CPU HS FOR X8DTL MB (must be placed on FRONT CPU)
Power Supply PWS-562-1H 1 560W MULTIPLE OUTPUT W/HARNESS STD 24PIN
Cable 5 CBL-0335L 1 FRONT CTL CABLE 20 PIN TO 20 PIN W/TUBE,70CM,PBF. 28AWG
Fan 1 FAN-0065L4 4 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M
Mounting Rails CSE-PT52L 1 Sliver chassis rail set for SC813M,515,113M
Drive Tray(s) MCP-220-00047-0B 8 Hot-swappable Hard Drive Tray (B = Black)