|
| SYS-1027GR-TRFT+ |
- SuperServer 1027GR-TRFT+ (Black)
|
| |
| CPU |
- Intel® Xeon® processor E5-2600 family
(up to 130W TDP)
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System Bus |
|
| GPU/Xeon Phi Support |
- M2090, up to 130W CPU at 30°C
- M2075, up to 130W CPU at 30°C
- K10/K20/K20X (Kepler), up to 130W CPU at 30°C
- Xeon Phi, up to 130W CPU at 30°C
|
| |
| Memory Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 128 GB DDR3 ECC and non-ECC UDIMM
|
| Memory Type |
- 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100GBASE-TX, and 1000BASE-T, RJ45 output
|
| Graphics |
|
| |
|
| SATA |
- 2 SATA 3.0 ports (6Gbps)
- 2 SATA 2.0 ports (3Gbps)
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| Video |
|
| Keyboard/Mouse |
- 1 PS/2 Keyboard/Mouse port
|
| Serial Port |
|
| |
| BIOS Type |
- 16Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
| PCI-Express |
- 4x PCI-E 3.0 x16 slots (up to 2x double width GPU/Xeon Phi cards, optional)
- 1x PCI-E 3.0 x8 low-profile slot
|
| |
|
| Hot-swap |
- 4x 2.5" Hot-swap drive bays
|
| | |
| Fans |
- 9x counter-rotating fans with optimal fan speed control
|
| |
|
| 1800W (1+1) Redundant 1800W power supply with PMBus |
| AC Input |
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
|
| DC Output |
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1800W: +12V/150A; +5Vsb/4A
|
| Certification |
  Platinum Certified
|
| |
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage regulator
|
| FAN |
- Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other Features |
|
| |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
